link to tool and parts in descriptionHow i remove and install rear bushings on e36 and e46 3 series bmwspress kit for bushing removalstumpcutting.buzz Default Title -This tool set allows for on-car installation AND removal of the three rear bushings located on the semi-trailing arm of E36 and E46 BMW 3-series cars: Upper control arm bushing.
Lower control arm bushing. Trailing arm bushing. The tool set includes fixtures to service both the new-style and old-style trailing arm bushings. The Garagistic E46 front control arm bushings feature a 2 piece design with a solid Delrin center sleeve and grease groove design. This helps to ensure a precision fit around the hex-shaped E46 control arm and also ensures that the bushing stays well lubricated to reduce any noise or squeak!
Polyurethane front control arm bushings are a great Price:Jun 07, Washers to remove the inner control arm bushing A A 24 mm socket may work to remove the control arm bushing. OD of socket must be less than 35 mm and ID needs to be 24 mmor greater. Socket outer dimensions may vary by brand, so double check the 31 mm stumpcutting.buzzted Reading Time: 9 mins. Front Control arm bushings install. Use this at your own risk. There might be better ways to do this, but this is what I did.
1. If your car is lower you might need to use ramps to get the jack under the car. 2. Use a floor jack and the center jack point. The best solution for solving the premature E46 M3 front bushing wear problem!
The Powerflex E46 M3 Front control arm bushing is one of our #1 selling products. The factory rubber bushing is a delicate piece that wears prematurely, creating sloppy steering, bad inner tire wear, and a jolting steering wheel under braking.