Call now to get tree help just as tree clearing, tree notch, bush cutter, shrub trimmers, stump disposal and plenty more across United States.


Call us

Call us +1 (855) 280-15-30










Underbucking Undercutting Chainsaw Technique 3.

High Cost. Nantucket.Estimated prices include all labor and materials including cleanup & hauling of branches, leaves and tree trunk.

Your actual price will be determined by tree height and trunk width. Prices do not include city permit requests, stump grinding or stump removal. Other Categories in Nantucket County, MA. Aug 11, Then, use one of the appropriate chainsaw techniques listed above to perform the correct and safest cut.

Clear escape routes - when using a chainsaw to cut down trees, there is no choice but to be underneath the tree until pretty much the last possible second.

9. Chainsaw Stump Cutting Techniques. There are several techniques to cut a tree stump; however, this method is the easiest and most fool-proof. To remove as much of the stump from the ground as possible, follow these steps. Start by gripping the front handle with your left thumb and apply full throttle before you begin to cut. Stand diagonally behind the saw while you work, not directly behind it.

But applying too much pressure can result in binding the chainsaw blade or kick-back, possibly causing injury.

If the trunk is supported at both ends. If you try to cut the trunk from above when it is supported at both ends, the cut will close up and trap the saw. Jul 19, Tools Needed To Remove Tree Stumps: 5. How To Remove a Stump with a Chainsaw – 6 Steps: Step One: Put On Your Personal Protective Equipment. Step Two: Cut Tree Stump as Low to the ground as possible.

Step Three: Shovel Dirt Away From the stumpcutting.buzzted Reading Time: 7 mins. The cutting procedure for felling a tree with chainsaw begins with a “hinge cut” which is a roughly degree cut (30 degrees at the bottom and 60 degrees at the top) made into the side of the tree in the direction you want it to fall.

The rule of thumb is to cut it to a depth of anywhere between 1/5th and 1/3rd the diameter of the tree.